Teach a man to fish, and he eats for life. Due to the immense popularity that Ben Heckendorn's been reaping for his recently completed PS360 controller mod, our fave mod god has decided to release a Do-It-Yourself guide for the general public's perusal.

Now, before the readership heads off to the actual guide, here's a rough on the materials and tools you will need for the attempt:

• PS3 SIXAXIS controller
• Xbox 360 (wireless) controller
• Perfboard with pre-drilled copper plated holes
• Thin wires
• x(4) T-1 sized LEDs
• x(2) 4.7k ohm resistors and (1) 10k ohm resistor
• Superglue (liquid type)
• x(11) 6mm tact switches
• x(2) 4.5mm tact switches
• x(4) size 3 screws, 1/2-inch long
• Dremel tool with cutoff wheel
• Soldering iron and desoldering iron
• X-Acto knife
• Hot Glue Gun
• Thin tipped magic markers
• Regular small Phillips screwdriver
• Small Torx screwdriver